74LVC1G66GS,132 Overview
Due to its 6-XFDFN packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 6. With a 3.3V voltage supply, the electrical component should be turned on and run. These analog multiplexers are built based on SPST - NO switching circuits. A total of 1 circuits make up this switch device. Try searching with 74LVC1G66 to find analog multiplexer variants. This digital multiplexer has 15Ohm internal resistance. You can find the functions of the 6 pins in the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 200μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. 1-bit operation is possible.
74LVC1G66GS,132 Features
Switch Circuit: SPST - NO
200μA Supply Current
-3db Bandwidth: 500MHz
1-Bit
74LVC1G66GS,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G66GS,132 Analog Switches & Multiplexers ICs applications.
- Central office
- DSUs
- CSU
- Fiber In The Loop (FITL)
- Cellular phones
- Data Acquisition Systems
- ISDN NT1/TA
- Automotive applications
- Cable Modem
- USB 1.1 signal switching circuits
