Name: MAX396CPI+
Brand: Maxim Integrated
SKU: MAX396CPI+
Price: 19.61000 USD
Availability: InStock

new

MAX396CPI+

Manufacturer part number:MAX396CPI+

Manufacturer:Maxim Integrated

Description:150ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX396 28 Pins 100pA 5V 28-DIP (0.600, 15.24mm)

Case Package:SOT-23

Datasheet:MAX396CPI+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	11 Weeks
Mounting Type	Through Hole
Package / Case	28-DIP (0.600, 15.24mm)
Surface Mount	NO
Number of Pins	28
Weight	4.190003g
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.143W
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX396
Pin Count	28
Operating Supply Voltage	15V
Number of Channels	16
Number of Circuits	1
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Max Supply Current	1μA
Propagation Delay	150 ns
Turn On Delay Time	500 ns
Voltage - Supply, Single/Dual (±)	2.7V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	400 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF 80pF
On-state Resistance Match-Nom	1.8Ohm
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.8 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	250ns
Switch-off Time-Max	200ns
Signal Current-Max	0.03A
Height	4.45mm
Length	37.34mm
Width	14.61mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX396CPI+ Product Details

MAX396CPI+ Overview

Presented in 28-DIP (0.600, 15.24mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. There is 16:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. In total, 28 terminations have occurred. This electronic part offers high-quality output due to its 16 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. As part of the design of the 28 series, this electronic part has been incorporated into the system. There are 1 circuits in this multiplexer. Try searching for MAX396 variants of the analog switch ic. It has an internal resistance of 100Ohm. Datasheets for 28 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 16V to a switch device. The digital multiplexer has a low cost Dual, Single supply. There should be 2.7V voltage fed to the electrical part below 2.7V. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 8V. It is recommended that you attach at least 3V to your dual power supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. A voltage of 15V can be used to operate the electronic component.