74ALVC574D,112 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. You can find it in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 1.65V~3.6V volts, it operates. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74ALVC series. There should be no greater frequency than 300MHzon its output. The element count is 1 . It consumes 10μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74ALVC574 family. An input voltage of 2.7Vpowers the D latch. This T flip flop has a capacitance of 3.5pF farads at the input. The electronic device belongs to the ALVC/VCX/Afamily. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. Its clock edge trigger type is Positive Edge. There are 8bits in its design. 3.6Vis the maximum supply voltage (Vsup). The flip flop contains 2ports. The number of input lines is 8.
74ALVC574D,112 Features
Tube package
74ALVC series
20 pins
8 Bits
74ALVC574D,112 Applications
There are a lot of Nexperia USA Inc. 74ALVC574D,112 Flip Flops applications.
- Latch
- ESD performance
- Dynamic threshold performance
- Bounce elimination switch
- Buffer registers
- Digital electronics systems
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Control circuits
- Safety Clamp
