MC74VHCT574ADWG Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74VHCTseries of FPGAs. It should not exceed 130MHzin terms of its output frequency. D latch consists of 1 elements. There is 4μA quiescent consumption. 20terminations have occurred. It is a member of the 74VHCT574 family. A voltage of 5V provides power to the D latch. A JK flip flop with a 4pFfarad input capacitance is used here. This D flip flop belongs to the family of AHCT/VHCT. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. 8bits are used in its design. Considering its reliability, this T flip flop is well suited for RAIL. The system runs on a power supply of 5V watts. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be set to 5V. There are 3 output lines in this JK flip flop. Currently, there are 8 channels available.
MC74VHCT574ADWG Features
Tube package
74VHCT series
20 pins
8 Bits
5V power supplies
MC74VHCT574ADWG Applications
There are a lot of ON Semiconductor MC74VHCT574ADWG Flip Flops applications.
- Single Up Count-Control Line
- Differential Individual
- Event Detectors
- ATE
- Cold spare funcion
- EMI reduction circuitry
- Set-reset capability
- Circuit Design
- Communications
- Individual Asynchronous Resets
