MC74HC273ADWR2G Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. You can find it in the Tape & Reel (TR)package. In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Temperature is set to -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74HCseries of FPGAs. A frequency of 35MHzshould not be exceeded by its output. There are 1 elements in it. There is 4μA quiescent consumption. 20terminations have occurred. The 74HC273 family contains it. It is powered from a supply voltage of 3V. This JK flip flop has a 10pFfarad input capacitance. Electronic devices of this type belong to the HC/UHfamily. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 8bits is used in this application. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch runs on a voltage of 2/6V volts. It operates with 8 output lines. It is reported that there are 8 channels.
MC74HC273ADWR2G Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC273ADWR2G Applications
There are a lot of ON Semiconductor MC74HC273ADWR2G Flip Flops applications.
- Supports Live Insertion
- Instrumentation
- Test & Measurement
- Counters
- Reduced system switching noise
- Clock pulse
- 2 – Bit synchronous counter
- Dynamic threshold performance
- Circuit Design
- Convert a momentary switch to a toggle switch
