TC54VN3002EZB Overview
Power management is mounted through 3 terminals. There is a Bulk-packaging method applied to IC management. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During operation, the power ic is supplied with a voltage of 2.1V. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. This power management system has 3 pins. Supply voltage (Vsup) should be at least 700mV for this power management. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Power management' mounting is recommended to be done with the Through Hole type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 3.6μA. It is always advisable to use TC54VN3002, the base supervisor number, when searching for similar PMICs from the manufacturer.
TC54VN3002EZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN3002EZB Applications
There are a lot of Microchip Technology TC54VN3002EZB Voltage Supervisors applications.
- Important electronics for automotive safety
- Leakage current detection
- DC stabilized power supply module
- Radio
- Fire equipment power monitoring system
- Embedded computing
- Military electronics
- Kitchen appliances
- Display equipment
- FPGA design
