MAX6802UR29D1/V+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The supervisor is always powered by a 5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. In total, the power management has 3 pins in it. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 1.2V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by MAX6802. The IC power comes from the well-known Automotive, AEC-Q100 series.
MAX6802UR29D1/V+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
MAX6802UR29D1/V+T Applications
There are a lot of Maxim Integrated MAX6802UR29D1/V+T Voltage Supervisors applications.
- Precision measurement
- Unattended substation automation
- Telecommunications equipment
- Detection of phase imbalance
- Magnetic resonance imaging
- Set top box
- Utility meter
- Household appliances
- Kitchen appliances
- Automotive permanent magnet synchronous motors
