MAX6865UK44D4S+T Overview
Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK44D4S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK44D4S+T Applications
There are a lot of Maxim Integrated MAX6865UK44D4S+T Voltage Supervisors applications.
- Power distribution systems of CCU
- Automotive permanent magnet synchronous motors
- Multi-voltage system
- Military electronics
- Set top box
- Consumer electronics
- Refrigeration
- WiFi router
- Linux and server computing
- Display equipment
