PL123S-05HSC Overview
In order to package it as a clock IC, the Tube package is used. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. 8 terminations can be found in frequency generators. This time clock generator should be voltaged at 3.3V. This Clock PLL will be fed by Clock as its input. 1 circuits are used to achieve clock PLL's superior flexibility. An upper frequency limit of 134MHz Max can be achieved with this clock-based frequency synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. It is safe to use this frequency synthesizer with a supply voltage above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. This part number PL123 is related to the following electrical components. A 8 pin is available on the PLL. At 0.25 ns Max, this analog clock generator exhibits low timing skew. A analog clock generator with 5 true output enable pins is configured for this application.
PL123S-05HSC Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
5 true outputs
PL123S-05HSC Applications
There are a lot of Microchip Technology PL123S-05HSC Clock Generators applications.
- High-speed communication applications
- Bit synchronization
- Modems
- Pulsed digital systems
- 10 Gigabit Ethernet
- GPS systems
- Media broadcast servers
- Signal demodulation
- Microprocessor clock multipliers
- Vector network analyzers (VNA)
