MIC826WYMT-T5 Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. A Cut Tape (CT) package is used to package the power management. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 6-UFDFN Exposed Pad functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. This power management system has 6 pins. There should be a minimum voltage supply (Vsup) of 1.8V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TJ. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 4.8μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MIC826. On the power management, there are a total of 2 inputs that are monitored.
MIC826WYMT-T5 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
4.8μA operating supply current
MIC826WYMT-T5 Applications
There are a lot of Microchip Technology MIC826WYMT-T5 Voltage Supervisors applications.
- Electronics installed in the vehicle
- Computer applications
- Data storage applications
- FPGA design
- Military communications
- Household appliances
- Power distribution systems of CCU
- Battery cars
- Insulation fault location system
- Dash board
