NCP304LSQ30T1 Overview
There are 4 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SC-82A, SOT-343 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 240. Manage ics operate at 1.5V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 4 pins. There are 4 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 1μA, this PMIC is capable of fully function as specified. You can always use NCP304, the base supervisor number, to search for similar PMICs of the manufacturer.
NCP304LSQ30T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304LSQ30T1 Applications
There are a lot of ON Semiconductor NCP304LSQ30T1 Voltage Supervisors applications.
- Sensitive sensors
- Medical-specific insulation monitor
- Efficient information transmission
- Leakage protection
- Unattended substation automation
- Leakage current detection
- Solar power charger
- Electric heating appliances
- WiFi router
- Electronics installed in the vehicle
