UCC2946DG4 Overview
There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. Power managment ic pin count is 8. IC management can only work with a supply voltage of 2.1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 10μA. A similar IC managements number of the manufacturer can always be found by using UCC2946, the base power ics number. It requires 2.5/5V watts of power to operate this voltage supervisor. At most, voltage supervisor can operate at a supply temperature of 18μA.
UCC2946DG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.1V
10μA operating supply current
UCC2946DG4 Applications
There are a lot of Texas Instruments UCC2946DG4 Voltage Supervisors applications.
- Display equipment
- Electrical fire monitoring system
- Detection of phase sequence
- Important electronics for automotive safety
- Power communication system
- Set top box
- Efficient information transmission
- Satellite navigation
- Military electronics
- Radio
