MCP112-475E/TO Overview
There are 3 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Bulk. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Power ics operate at 1 supply voltages. By Through Hole, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 1.75μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. Voltage supervisor can work with a supply temperature of 1.75μA at the most.
MCP112-475E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112-475E/TO Applications
There are a lot of Microchip Technology MCP112-475E/TO Voltage Supervisors applications.
- emergency room
- Smartphones
- Radio
- Efficient information transmission
- Analog circuit
- Personal computers
- Electronics installed in the vehicle
- Refrigeration
- Transformer load monitoring equipment
- Insulation fault location system
