MCP120-485I/SN Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tube, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. When 5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 8 pins are located on this power management. There are 8 pins on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 60μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MCP120. A maximum supply temperature of 60μA can be used with this power management.
MCP120-485I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP120-485I/SN Applications
There are a lot of Microchip Technology MCP120-485I/SN Voltage Supervisors applications.
- DVR
- Network equipment
- Power distribution systems of ICU
- DC stabilized power supply module
- Computer applications
- Utility meter
- Microprocessor system
- Military electronics
- DSP
- Important electronics for automotive safety
