BD46245G-TR Overview
As you can see, this power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Voltage Detector manage ics. There is a voltage supply of 4.4V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. This power management has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 950mV. Voltage (Vsup) shouldn't exceed 9.5V volts in this PMIC. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~105°C TA. Power management has an output of Push-Pull, Totem Pole during operation. It is always advisable to use BD46, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 2.85μA can be used. As you can see, this IC power comes from the well-known BD46xxx series of products.
BD46245G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD46245G-TR Applications
There are a lot of ROHM Semiconductor BD46245G-TR Voltage Supervisors applications.
- Insulation fault location system
- Power distribution systems of operating room
- Functional modules
- Display equipment
- Medical-specific isolation transformer
- Satellite navigation
- Fire equipment power monitoring system
- Magnetic resonance imaging
- Kitchen appliances
- Electrical fire monitoring system
