MAX975ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with a CMOS, Rail-to-Rail, TTL output is used here.We ship the part through Tube .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.The type of the chip can be classified as General Purpose .In total, it contains 1 elements.A total of 8 pins are included.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX975 .The comparator presents a quiescent current of 500μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 500μA .A current supply greater than 500μA may result in the comparator malfunctioning.A maximum current of 100nA can be supplied to the device.A normal operation requires a voltage of 5V .
MAX975ESA+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 500μA
MAX975ESA+ Applications
There are a lot of Maxim Integrated MAX975ESA+ linear comparators applications.
- High-Speed Differential Line Receiver
- Mobile Communications
- Appliances
- Infotainment and Clusters
- Factory automation & control
- Point of load regulators
- Building automation
- Automatic Test Equipment
- Wide Range VCO; MOS Clock Timers
- Threshold Detectors
