MAX9692EUB+ Overview
In order to make transportation easier, it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .A comparator with an output type of Complementary, ECL is being used.We ship the part through Tube .As you can see, the comparator has10 terminals.Electronic comparator is a part of Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as with Latch .A total of 1 elements can be found in it.A total of 10 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 10 pins.Alternatively, you may search for MAX9692 to find more pin-to-pin solutions for your specific needs.There is 26mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 36mA .A current supply greater than 36mA may cause the comparator to malfunction.The device can be run with 5-5.2V power supplies.Electronic comparator is possible to input a maximum of 20μA current into the device.Comparator electronics follows that the voltage gain of the part is 70dB .A comparator's maximum supply voltage is 6V volts.Using a voltage as low as -300mV is possible for this comparator.
MAX9692EUB+ Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9692EUB+ Applications
There are a lot of Maxim Integrated
MAX9692EUB+ linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
