LMV393IDDUR Overview
The product is packaged in 8-VFSOP (0.091, 2.30mm Width) in order to facilitate transportation.Output type of this comparator is Open Collector .The part is shipped by Cut Tape (CT) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .Currently, it consists of only 2 elements.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search LMV393 for more pin-to-pin solutions.A quiescent current of 250μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 200μA .An excess of current supply over 200μA could result in malfunction of the comparator.You are allowed to input a maximum current of 250nA into the device.The voltage gain of the part is indicated by 93.98dB in the voltage formula.For normal operation, the operating supply voltage must be 5V .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMV393IDDUR Features
Open Collector output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 250μA
Voltage Gain: 93.98dB
LMV393IDDUR Applications
There are a lot of Texas Instruments
LMV393IDDUR linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
