MAX870EUK+T Overview
There are 1 outputs supported by the voltage regulator. The rectifier regulator is packaged in SC-74A, SOT-753 in order to facilitate transportation. It's ready to ship in Tape & Reel (TR) packages. This power supply regulator has a general volatge output of -1.4V~-5.5V. Surface Mount Universal mount allows for easy adaptation. It is intended for use in applications such as Charge Pump, LCD and others. The operating temperature should be set to -40°C~85°C to avoid mal-function. This external regulator requires a voltage input of 1.4V~5.5V. 5 terminals are present on the electronic component. This electronic part is highly regarded as a SWITCHED CAPACITOR CONVERTER regulator. The rectifier regulator's pinout begins with 5pins. If you are trying to find pin-to-pin solutions, try searching MAX870. There is a Surface Mount on the board for mounting to a PCB or other board. The power regulator has 5 pins. The AC voltage regulator and other Other Analog ICs play an important role in the industry. There should be a 25mA output from the external regulator at present. There must be an input voltage higher than 1.4Vin order to operate this rectifier regulator. A frequency of 125kHzcan be selected for the voltage controller. At its maximum output, voltage regulator produces current 50mA. It is possible to set the minimum supply voltage to 1V. There is 5.5V maximum voltage that can be supplied by the voltage regulator.
MAX870EUK+T Features
Widely used in Charge Pump, LCD applications
SWITCHED CAPACITOR CONVERTER analog IC
MAX870EUK+T Applications
There are a lot of Maxim Integrated MAX870EUK+T Specialized Voltage Regulators applications.
- Chipset/RAM Supplies as Low as 0.5 V
- Set-Top Box
- Performance DSPs
- FPGAs
- Cell Phones
- Telecom/Datacom
- Personal Communicators
- Camcorders
- Portable GPS
- DAC Controlled High Current Output Stage
