MAX8506ETE+ Overview
The voltage regulator supports a total of 1 outputs. To facilitate transportation, alternator regulator is packaged in 16-WQFN Exposed Pad. Currently, the power regulator is available for shipping in Tube packages. This power supply regulator has a general volatge output of 0.4V~3.4V. Easy adaptability with the Surface Mount universal mount. There are a number of applications targeted at Converter, WCDMA. As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions. The external regulator is designed to operate at a voltage of 2.6V~5.5V. The voltage regulator contains 16terminals. The electronic part is widely regarded as a regulator of type SWITCHING REGULATOR. The rectifier regulator's pinout begins with 16pins. For more pin-to-pin solutions, please search MAX8506. A Surface Mount is provided for mounting on PCBs or other boards. The power regulator has 16 pins. For normal operation, a voltage of 5.5V is required. Current output from the electrical regulator should be 600mA. A voltage greater than 2.6Vis required for this rectifier regulator. In this case, the AC voltage regulator will switch at a frequency of 1MHz. At maximum output, it is designed to produce a current of 600mA.
MAX8506ETE+ Features
Widely used in Converter, WCDMA applications
SWITCHING REGULATOR analog IC
Supply voltage: 5.5V
MAX8506ETE+ Applications
There are a lot of Maxim Integrated MAX8506ETE+ Specialized Voltage Regulators applications.
- Point of Load Regulation for High
- Mobile PC Regulator
- DDR Memory Termination
- Cell Phones
- Low-Voltage
- PCS Phones
- TFT LCD Bias Supplies
- Microprocessors Requiring Sequencing
- LCD-Bias Contrast Control
- PHS Phones
