MAX690RCPA+ Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. Please find attached DIP functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Through Hole. There is a subcategory of this power ic known as Power Management Circuits. 8 pins are present in total in this power management. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.75V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The supply current of the power management is 10mA. To operate this power management, you will need at least 3/5V volts of power. A maximum supply temperature of 10mA can be used with this power management.
MAX690RCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
MAX690RCPA+ Applications
There are a lot of Maxim Integrated MAX690RCPA+ Voltage Supervisors applications.
- Military communications
- Detection of phase sequence
- Microprocessor system
- Unattended substation automation
- Rechargeable batteries
- Smartphones
- Utility meter
- Insulation fault location system
- Kitchen appliances
- Leakage current detection
