CAT1025WI-42-GT3 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management conducts at a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. In total, IC powers are 8 pins on the board. There are 8 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 3mA for the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. For similar manage ics search of the manufacturer, you can always refer to CAT1025, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 3mA.
CAT1025WI-42-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1025WI-42-GT3 Applications
There are a lot of ON Semiconductor CAT1025WI-42-GT3 Voltage Supervisors applications.
- Power distribution systems of operating room
- Electronics installed in the vehicle
- Insulation fault location system
- Radio
- Sensitive sensors
- Automotive permanent magnet synchronous motors
- Smartphones
- External alarm
- Utility meter
- Satellite navigation
