MAX6865UK43D1S+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 2.5V-voltage supply. Power ics operate at 1 supply voltages. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. It is recommended that Vsup should not be less than 1.1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK43D1S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK43D1S+T Applications
There are a lot of Maxim Integrated MAX6865UK43D1S+T Voltage Supervisors applications.
- Telecommunications equipment
- Analog circuit
- Transformer load monitoring equipment
- DVR
- Radio
- Important electronics for automotive protection
- Kitchen appliances
- Cloud computing
- Power distribution systems of operating room
- Household appliances
