Name: STM802RM6E
Brand: STMicroelectronics
SKU: STM802RM6E
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.6V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	STM802
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	60μA
Nominal Supply Current	60μA
Power Dissipation	320mW
Max Supply Current	60μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	2.625V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	3V
Max Reset Threshold Voltage	3.15V
Undervoltage Threshold	2.59V
Overvoltage Threshold	2.7V
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

STM802RM6E Product Details

STM802RM6E Overview

Power management is mounted through 8 terminals. It is packaged with Tube. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. When 3.6V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 60μA volt supply current. It is always advisable to use STM802, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3/5V volts of power. At most, voltage supervisor can operate at a supply temperature of 60μA.