MAX6865UK28D5L+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 2.5V. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 5. There are 5 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 7μA. To find similar IC managements from the manufacturer, you can always search by MAX6865.
MAX6865UK28D5L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK28D5L+T Applications
There are a lot of Maxim Integrated MAX6865UK28D5L+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Battery cars
- DSP
- Network equipment
- Computer applications
- Analog circuit
- Consumer electronics
- Military communications
- Automotive power systems
- WiFi router
