TL7705AID1/A Overview
Power management is mounted through 8 terminals. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 3.6V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 18V volts. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -25°C~85°C TA. While in operation, this supervisor has a voltage output of Complementary. It is estimated that the voltage supervisor's supply current is 3.3mA. It is always advisable to use TL7705, the base supervisor number, when searching for similar PMICs from the manufacturer.
TL7705AID1/A Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
3.3mA operating supply current
TL7705AID1/A Applications
There are a lot of STMicroelectronics TL7705AID1/A Voltage Supervisors applications.
- Transformer load monitoring equipment
- Low voltage/high power - AI, GPU
- Electronics installed in the vehicle
- Personal computers
- Detection of phase loss
- Medical-specific insulation monitor
- emergency room
- Embedded computing
- Fire equipment power monitoring system
- Leakage current detection
