TPS3836E18DBVTG4 Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 1.8V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. Power management has a total of 5 pins. There are 5 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1.6V for this PMIC. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 250nA. It is always advisable to use TPS3836E18, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 15μA.
TPS3836E18DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3836E18DBVTG4 Applications
There are a lot of Texas Instruments TPS3836E18DBVTG4 Voltage Supervisors applications.
- FPGA design
- Set top box
- DC stabilized power supply module
- Computer applications
- Detection of phase imbalance
- Insulation fault location system
- Microprocessor system
- External alarm
- Important electronics for automotive safety
- Embedded computing
