MAX6755UKZD3+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 1.4V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 13μA is the recommended value. You can always use MAX6755, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6755UKZD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current
MAX6755UKZD3+T Applications
There are a lot of Maxim Integrated MAX6755UKZD3+T Voltage Supervisors applications.
- Battery cars
- Embedded computing
- Leakage current detection
- Transformer load monitoring equipment
- Utility meter
- Detection of phase sequence
- Power distribution systems of CCU
- FPGA design
- Radar
- Power distribution systems of operating room
