MAX6855UK19D5+T Overview
There are 5 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. 5 pins are on the supervisor. Supply voltage (Vsup) should be at least 1.1V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 7μA. To find similar IC managements from the manufacturer, you can always search by MAX6855.
MAX6855UK19D5+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK19D5+T Applications
There are a lot of Maxim Integrated MAX6855UK19D5+T Voltage Supervisors applications.
- Military electronics
- Power distribution systems of infant care room
- Detection of phase loss
- Fire equipment power monitoring system
- Refrigeration
- Leakage current detection
- DSP
- Efficient information transmission
- Microprocessor system
- Battery-powered equipment
