Name: MAX6762TARAD0+T
Brand: Maxim Integrated
SKU: MAX6762TARAD0+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	111 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-WDFN Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Multi-Voltage Supervisor
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	1.951W
Technology	BICMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.6V
Terminal Pitch	0.65mm
Base Part Number	MAX6762
Output	Open Drain or Open Collector
Pin Count	8
Number of Channels	2
Max Supply Voltage	6V
Min Supply Voltage	1V
Operating Supply Current	13μA
Adjustable Threshold	YES
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	3V Adj
Number of Voltages Monitored	2
Reset Timeout	20μs Typical
Supply Current-Max (Isup)	0.03mA
Threshold Voltage	+3V
Undervoltage Threshold	2.55V
Overvoltage Threshold	3.45V
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX6762TARAD0+T Product Details

MAX6762TARAD0+T Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-WDFN Exposed Pad functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.6V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 2. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 8 pins. There are 8 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 13μA. A similar IC managements number of the manufacturer can always be found by using MAX6762, the base power ics number.