MAX6726AKAYDD3+T Overview
There are 8 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. A series of 3 channels can be found on this supervisor. There are SOT-23-8 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. In a 3 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. 8 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C. During operation, this power management system outputs Push-Pull, Push-Pull. As far as the supply current of the power management is concerned, it is 15μA. You can always use MAX6726A, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 1/5V volts in order to work correctly.
MAX6726AKAYDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6726AKAYDD3+T Applications
There are a lot of Maxim Integrated MAX6726AKAYDD3+T Voltage Supervisors applications.
- Computer applications
- Household appliances
- Electronics installed in the vehicle
- Utility meter
- Urban rail transit weak current power monitoring
- Medical-specific insulation monitor
- Sensitive sensors
- Important electronics for automotive safety
- Battery-powered equipment
- Leakage current detection
