NCP300HSN45T1 Overview
Power management is mounted through 5 terminals. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SOT-23-5 Thin, TSOT-23-5 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 240. A supply voltage of 1.5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 5 pins are located on this power management. This power management system has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 500nA. It is always advisable to use NCP300, the base supervisor number, when searching for similar PMICs from the manufacturer.
NCP300HSN45T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300HSN45T1 Applications
There are a lot of ON Semiconductor NCP300HSN45T1 Voltage Supervisors applications.
- Linux and server computing
- Radar
- Microcontroller system
- Analog circuit
- Battery cars
- Efficient information transmission
- Satellite navigation
- External alarm
- Radio
- DSP
