ADM6713LAKS-REEL Overview
It is mounted through 4 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a SC-82A, SOT-343 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 240. During operation, the power ic is supplied with a voltage of 5V. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 4 pins that are attached to IC management. Power managment ic pin count is 70. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 60μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM6713, which is the base power ics number. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature voltage supervisor can handle is 60μA. There are a total of 1 monitored inputs on the power management.
ADM6713LAKS-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM6713LAKS-REEL Applications
There are a lot of Analog Devices Inc. ADM6713LAKS-REEL Voltage Supervisors applications.
- Solar power charger
- Electronics installed in the vehicle
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
- Battery cars
- Power distribution systems of operating room
- FPGA design
- Kitchen appliances
- Smartphones
- Display equipment
