MAX6455UT23S+T Overview
As you can see, this power management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-23-6 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 3.3V. IC management is possible to find a succession of 2 voltages that have been checked. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. There are a total of 6 pins on power management. This power management has 6 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C degrees. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. You can always use MAX6455, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6455UT23S+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current
MAX6455UT23S+T Applications
There are a lot of Maxim Integrated MAX6455UT23S+T Voltage Supervisors applications.
- Battery cars
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Power distribution systems of ICU
- Radar
- Power distribution systems of CCU
- Transformer load monitoring equipment
- Leakage protection
- Solar power charger
- Electronics installed in the vehicle
