MAX6394US470D1+T Overview
Power management is mounted through 4 terminals. Strip-packaging is used. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. A total of 4 pins are located on this power management. Pin count of the power management is 4. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. To operate this power management, you will need at least 3/5V volts of power. A maximum supply temperature of 15μA can be used.
MAX6394US470D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6394US470D1+T Applications
There are a lot of Maxim Integrated MAX6394US470D1+T Voltage Supervisors applications.
- Efficient information transmission
- Transformer load monitoring equipment
- DSP
- Detection of phase imbalance
- Power distribution systems of infant care room
- Display equipment
- Battery-powered equipment
- Precision measurement
- Dash board
- Data storage applications
