Name: MAX690CPA+
Brand: Maxim Integrated
SKU: MAX690CPA+
Price: 10.19000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	400mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Frequency	250kHz
Base Part Number	MAX690
Output	Push-Pull, Totem Pole
Pin Count	8
Max Output Current	20mA
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.75V
Operating Supply Current	350μA
Nominal Supply Current	3.5mA
Power Dissipation	400mW
Max Supply Current	10mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	4.65V
Number of Voltages Monitored	1
Reset Timeout	35ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Height	4.45mm
Length	9.91mm
Width	7.87mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX690CPA+ Product Details

MAX690CPA+ Overview

There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tube. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Through Hole. There is a subcategory of this power ic known as Power Management Circuits. A total of 8 pins are located on this power management. 8 pins are present on the power management system. It is recommended that Vsup should not be less than 4.75V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 350μA is the recommended value. It is always advisable to use MAX690, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. A maximum supply temperature of 10mA can be used. It is generally acceptable to use this IC power with a frequency of 250kHz because it will work well in the vast majority of cases.