MAX6865UK28D2S+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2.5V supply voltages. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. 5 pins make up the power management. IC management can only work with a supply voltage of 1.1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6865, which is the base power ics number.
MAX6865UK28D2S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK28D2S+T Applications
There are a lot of Maxim Integrated MAX6865UK28D2S+T Voltage Supervisors applications.
- Display equipment
- Dash board
- Medical-specific insulation monitor
- Battery cars
- Satellite navigation
- Military electronics
- Functional modules
- Automotive power systems
- WiFi router
- Consumer electronics
