MAX6310UK40D3-T Overview
There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. IC management conducts in a 2-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 5 pins are located on this power management. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6310, which is the base power ics number.
MAX6310UK40D3-T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
MAX6310UK40D3-T Applications
There are a lot of Maxim Integrated MAX6310UK40D3-T Voltage Supervisors applications.
- External alarm
- FPGA design
- Urban rail transit weak current power monitoring
- Smart meter
- Power communication system
- Detection of phase imbalance
- Satellite navigation
- Dash board
- Personal computers
- Leakage protection
