MAX6723AUTSHD3+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 3 channels. Please refer to power management for SOT-23-6 functions. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. In a 3 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 6 pins on IC management. This power management system has 6 pins. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is estimated that the voltage supervisor's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6723A, which is the base power ics number. To operate this power management, you will need at least 1/5V volts of power.
MAX6723AUTSHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6723AUTSHD3+T Applications
There are a lot of Maxim Integrated MAX6723AUTSHD3+T Voltage Supervisors applications.
- Consumer electronics
- Dash board
- Fire equipment power monitoring system
- Electric heating appliances
- Kitchen appliances
- Digitally controlled LDO regulators circuit
- Important electronics for automotive safety
- Battery-powered equipment
- Embedded computing
- Automotive permanent magnet synchronous motors
