MAX6862UK32+T Overview
A total of 5 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 2.5V. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 5 pins in it. There are 5 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6862, the base power ics number.
MAX6862UK32+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6862UK32+T Applications
There are a lot of Maxim Integrated MAX6862UK32+T Voltage Supervisors applications.
- Power distribution systems of operating room
- Precision measurement
- Smart meter
- Network equipment
- Rechargeable batteries
- Power distribution systems of infant care room
- Insulation fault location system
- FPGA design
- Sensitive sensors
- Power distribution systems of CCU
