Name: MAX4712ESE
Brand: Maxim Integrated
SKU: MAX4712ESE
Availability: InStock

new-10%

MAX4712ESE

Manufacturer part number:MAX4712ESE

Manufacturer:Maxim Integrated

Description:125ns, 80ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE MAX4712 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX4712ESE Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	25Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
Subcategory	Multiplexer or Switches
Max Power Dissipation	457mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4712
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	5.5V
Power Supplies	3/5/+-5V
Number of Channels	4
Max Supply Voltage	11V
Min Supply Voltage	2.7V
Nominal Supply Current	75μA
Max Supply Current	65μA
Throw Configuration	SPST
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	2.7V~11V ±2.7V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	25Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	125ns, 80ns
Charge Injection	25pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-87dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Switch-off Time-Max	80ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4712ESE Product Details

MAX4712ESE Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. Into the electrical component body are injected 16 pins. SPST - NO switching circuits are used in these analog switch ics. Try searching with MAX4712 if you're looking for variants. Internally, this switch multiplexer has a resistance of 25Ohm. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 11V to a switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.7V. If put voltage greater than 65μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 2.7V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Operating voltages range from 5.5V. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.