Name: 74LVC4066PW,112
Brand: Nexperia USA Inc.
SKU: 74LVC4066PW,112
Availability: InStock

new-10%

74LVC4066PW,112

Manufacturer part number:74LVC4066PW,112

Manufacturer:Nexperia USA Inc.

Description:3.9ns, 5ns SPST - NO 10Ohm DUAL Analog Switches 74LVC4066 14 Pins 5μA 2.7V 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:74LVC4066PW,112 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	4 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	15Ohm
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74LVC4066
Pin Count	14
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	40μA
Power Dissipation	500mW
Throw Configuration	SPST
Turn On Delay Time	5.3 ns
Number of Inputs	4
Supply Type	Single
Turn-Off Delay Time	4.2 ns
-3db Bandwidth	500MHz
On-State Resistance (Max)	10Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	46 dB
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	8pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3.9ns, 5ns
Charge Injection	7.5pC
Crosstalk	-56dB @ 1MHz
Switch-on Time-Max	8ns
Switch-off Time-Max	9.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	950μm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74LVC4066PW,112 Product Details

74LVC4066PW,112 Overview

Shipping overseas is convenient with the electronic component packed in 14-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 14. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. The electronic part body is injected with 14 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with 74LVC4066 if you're looking for variants. There is 15Ohm internal resistance in this digital multiplexer. For functions related to 14 pins, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 40μA current would be sufficient. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. 5V operating voltages are supported by the electronic component. It is possible to operate 4 inputs.