Name: CD74HC4066PWG4
Brand: Texas Instruments
SKU: CD74HC4066PWG4
Availability: InStock

new-10%

CD74HC4066PWG4

Manufacturer part number:CD74HC4066PWG4

Manufacturer:Texas Instruments

Description:SPST - NO 70Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:CD74HC4066PWG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	70Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Base Part Number	74HC4066
Pin Count	14
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	10V
Min Supply Voltage	2V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	100 ns
Input Voltage (Min)	2V
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	150 ns
On-State Resistance (Max)	70Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-72dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	30ns
Voltage - Supply, Single (V+)	2V~10V
Normal Position	NO
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4066PWG4 Product Details

CD74HC4066PWG4 Overview

Shipping overseas is convenient with the electronic component packed in 14-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -55°C~125°C TA. There are 14 terminations totally. High-quality output is provided by the electronic component's 4 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. A total of 14 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Using the 74HC4066 search parameter, you can discover variants of the switch. A 70Ohm internal resistance characterizes this multiplexer. You can find the functions of the 14 pins in the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 10V in normal situations. Single supply type digital switch with a low cost. 2V should be the lowest voltage fed to the electronic component. A voltage of 2V~10V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 16μA. In 200MHz-bandwidths, data can be transferred.