MAX4704ETC+T Overview
This electronic part is conveniently packaged in 12-WFQFN Exposed Pad, making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. In total, there have been 12 terminations. High-quality output is provided by the electronic component's 4 channels. On the other hand, analog switches can be constructed using SP4T switching circuits. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with MAX4704. Internally, this switch multiplexer has a resistance of 60Ohm. For details about the functions of 12 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. There should be 1.8V voltage fed to the electrical part below 1.8V. In order to operate this switch device, it would need a current of 1μA. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage.
MAX4704ETC+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
-3db Bandwidth: 200MHz
MAX4704ETC+T Applications
There are a lot of Maxim Integrated MAX4704ETC+T Analog Switches & Multiplexers ICs applications.
- CSU
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Battery Powered Instruments
- Precision data acquisition
- Audio and video routing
- Private Branch Exchange (PBX)
- Precision instrumentation
- Relay replacements
- Remote wireless modules
- ATM
