Name: MAX4617CSE
Brand: Maxim Integrated
SKU: MAX4617CSE
Availability: InStock

new-10%

MAX4617CSE

Manufacturer part number:MAX4617CSE

Manufacturer:Maxim Integrated

Description:15ns, 10ns 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4617 16 Pins 1nA 3.3V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX4617CSE Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2002
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	10Ohm
Max Power Dissipation	696mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	3.3V
[email protected] Reflow Temperature-Max (s)	20
Base Part Number	MAX4617
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	1μA
Throw Configuration	SP8T
Propagation Delay	15 ns
Turn On Delay Time	20 ns
Logic Function	Multiplexer
Supply Type	Single
Turn-Off Delay Time	15 ns
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	8:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 27pF
Switch Time (Ton, Toff) (Max)	15ns, 10ns
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-96dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.075A
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4617CSE Product Details

MAX4617CSE Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature extended to 0°C~70°C TA. A total of 16 terminations have been recorded. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 3.3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. Use MAX4617 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for 16 pin functions are available upon request. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. In order to operate this switch device, it would need a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. It can operate from 5V operating voltages.