Name: DG2618DN-T1-E4
Brand: Vishay Siliconix
SKU: DG2618DN-T1-E4
Availability: InStock

new-10%

DG2618DN-T1-E4

Manufacturer part number:DG2618DN-T1-E4

Manufacturer:Vishay Siliconix

Description:69ns, 39ns SPDT 7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2618 10 Pins 2nA 3V 10-VFDFN Exposed Pad

Case Package:SOT-23

Datasheet:DG2618DN-T1-E4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad
Number of Pins	10
Weight	50.008559mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Termination	SMD/SMT
Resistance	7Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.191W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2618
Pin Count	10
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	3V
Polarity	Non-Inverting
Power Supplies	3V
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.5V
Operating Supply Current	100nA
Power Dissipation	1.191W
Max Supply Current	300μA
Turn On Delay Time	69 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	39 ns
On-State Resistance (Max)	7Ohm
High Level Output Current	150mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	32 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	9pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	69ns, 39ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	76ns
Voltage - Supply, Single (V+)	1.5V~3.6V
Height	880μm
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant

DG2618DN-T1-E4 Product Details

DG2618DN-T1-E4 Overview

The electronic component is convenient to ship overseas because it is packed in a 10-VFDFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 10. As a result of its 1 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. A total of 10 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. Use DG2618 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 7Ohm. Datasheets for functions of 10 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 3.6V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.5V should be applied to the electronic component. This multiplexer would work with 100nA current. Using only a single voltage supply, this analog switch requires 1.5V~3.6V voltage. If you put voltage higher than 300μA on the digital multiplexer, damage may occur. A voltage of 3V can be used to operate the electronic component. A 2 input needs to be operated. There are 4 outputs on the analogue multiplexer.