Name: MAX4613ETE+T
Brand: Maxim Integrated
SKU: MAX4613ETE+T
Price: 2.36000 USD
Availability: InStock

new-10%

MAX4613ETE+T

Manufacturer part number:MAX4613ETE+T

Manufacturer:Maxim Integrated

Description:250ns, 120ns SPST - NO/NC 70Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4613 16 Pins 500pA 15V 16-WQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4613ETE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	70Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.667W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.8mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX4613
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Power Supplies	12/+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	40V
Min Supply Voltage	4.5V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	400 ns
Voltage - Supply, Single/Dual (±)	4.5V~40V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	70Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	250ns, 120ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	4 Ω (Max)
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	250ns
Switch-off Time-Max	120ns
Height Seated (Max)	0.8mm
Length	5mm
Width	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4613ETE+T Product Details

MAX4613ETE+T Overview

Packed in 16-WQFN Exposed Pad, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. A 15V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. Unlike digital switches, these are based on SPST - NO/NC switching circuits. This multiplexer is composed of 4 circuits. MAX4613 can be used to search for analog multiplexer variants. A 70Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 40V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 4.5V voltage fed to the electrical part below 4.5V. This digital switch can be operated with a current of 1μA. It may damage the digital multiplexer if the voltage is higher than 1μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. You should attach at least 4.5V voltage if you are using dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electrical part can be operated at 18V voltage levels.