Name: ADG787BCBZ-500RL7
Brand: Hotenda
SKU: ADG787BCBZ-500RL7
Price: 3.12000 USD
Availability: InStock

new-10%

ADG787BCBZ-500RL7

Manufacturer part number:ADG787BCBZ-500RL7

Manufacturer:Hotenda

Description:19ns, 5ns SPDT 3Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE ADG787 10 Pins 50pA Typ 2.7V 10-UFBGA, WLCSP

Case Package:SOT-23

Datasheet:ADG787BCBZ-500RL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	10-UFBGA, WLCSP
Surface Mount	YES
Number of Pins	10
Operating Temperature	-25°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	3Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.5μW
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG787
Pin Count	10
Number of Outputs	4
Qualification Status	Not Qualified
Operating Supply Voltage	5.5V
Power Supplies	3/5V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Operating Supply Current	5nA
Power Dissipation	5.5μW
Max Supply Current	1μA
Turn On Delay Time	19 ns
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
Bandwidth	145MHz
Turn-Off Delay Time	5 ns
On-State Resistance (Max)	3Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	50pA Typ
Channel Capacitance (CS(off), CD(off))	16pF
On-state Resistance Match-Nom	0.07Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	19ns, 5ns
Insertion Loss (dB)	0.2 dB
Charge Injection	14pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-110dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	30ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	6Ohm
Normal Position	NO/NC
Height	370μm
Length	2.06mm
Width	1.56mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG787BCBZ-500RL7 Product Details

ADG787BCBZ-500RL7 Overview

Packed in 10-UFBGA, WLCSP, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -25°C~85°C TA. There are 10 terminations totally. By its 2 channels, the electronic component provides high-quality output. With a 2.7V voltage supply, the electrical component should be turned on and run. 10 pins are injected to the electronic part body. These analog multiplexers are built based on SPDT switching circuits. If you are looking for variants of the digital switch, trying search with ADG787. This digital multiplexer has 3Ohm internal resistance. Please refer to the datasheets for 10 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 1.8V. 5nA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The electronic component can function from 5.5V. This switch operates within the bandwidth of 145MHz. This electronic component presents a Drain to Source resistance of 6Ohm. 4 outputs are included in the analogue multiplexer.