ADG702LBRJZ-500RL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SC-74A, SOT-753. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. 5 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. A key feature of the 5 series is the inclusion of this electronic part as part of its design. A SPST - NC switching circuit is used to build these analog multiplexers. Try searching with ADG702 to find analog multiplexer variants. This digital multiplexer has 3Ohm internal resistance. You can find the functions of the 5 pins in the datasheets. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. In order for the electronic part to function properly, the lowest voltage should be 1.8V. Using a single voltage supply, this switch device consumes 1.8V~5V volts. Put voltage above 1pA on the multiplexer to cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. There are 1 inputs to be operated. Drain to Source resistance is 4Ohm.
ADG702LBRJZ-500RL7 Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 200MHz
Drain-to-Source resistance: 4Ohm
ADG702LBRJZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG702LBRJZ-500RL7 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video routing
- Wireless Local Loop
- HDTV
- CSU
- Voice over IP/DSL – Integrated Access Devices, Smart
- Battery Powered Systems
- Avionics and Military Systems
- RGB switches
- Battery Powered Instruments
