MAX323CUA+T Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there have been 8 terminations. A 1 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. An injection of 8 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. 2 circuits are used in this analogue multiplexer. Try searching for MAX323 variants of the analog switch ic. Analog switches have 60Ohm internal resistance. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16V to a switch device. Analog switch ics with Single supply type are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. It would be sufficient to run this analogue multiplexer with 1μA current. A voltage of 2.7V~16V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 100pA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX323CUA+T Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
MAX323CUA+T Applications
There are a lot of Maxim Integrated
MAX323CUA+T Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
